Hot! iPhone XS
Search Site

Shopping Cart
0 item

APC Power-Saving Back-UPS Pro 1500, 230V

SKU: BR1500GI

Availability: In stock

$668.00

1 Year 2 Year 3 Year 4 Year 5 Year
$55.67
per month
$27.83
per month
$18.56
per month
$13.92
per month
$11.13
per month
Available for BIBD AT-Tamwil and Baiduri
  • Available for any total purchase of $500.00 and above.
  • Not all items listed online can be purchased by Bank Loan.
  • Exclude normal bank charges, processing and service fee.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Audible alarms
Provides notification of changing utility power and UPS power conditions

Disconnected battery notification
Warns when a battery is not available to provide backup power.

USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.

LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.

Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Cold-start capable
Provides temporary battery power when the utility power is out.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Output
Output Power Capacity 865Watts / 1.5 kVA
Max Configurable Power 865Watts / 1.5 kVA
Nominal Output Voltage 230V
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Output Frequency (not synced) -
Topology Line Interactive
Waveform type Stepped approximation to a sinewave
Transfer Time 10ms typical : 12ms maximum
Input
Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Input voltage range for main operations 176 - 294V
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
RBC Quantity 1
Typical recharge time 8hour(s)
Expected Battery Life (years) 3 - 5
Replacement Battery APCRBC124
Physical
Maximum Height 301mm , 30.1CM
Maximum Width 112mm , 11.2CM
Maximum Depth 380mm , 38.0CM
Net Weight 12.7KG

Write Your Own Review

Only registered users can write reviews. Please, log in or register