Sekonic L-308S Digital Master Light Meter

SKU: L-308S-8652

0 Review(s) | Add Review

Availability: In stock

$338.00

1 Year	2 Year	3 Year	4 Year	5 Year
$28.17 per month	$14.08 per month	$9.39 per month	$7.04 per month	$5.63 per month

Available for BIBD AT-Tamwil and Baiduri

Available for any total purchase of $500.00 and above.
Not all items listed online can be purchased by Bank Loan.
Exclude normal bank charges, processing and service fee.

Quantity

Sekonic L-308S Digital Master Light Meter

You may also be interested in the following product(s)

Sekonic L-398A Studio Deluxe III

$298.00
Sekonic L-758D Digital Master Light Meter

$798.00

The pocket-sized Sekonic L-308S FLASHMATE is the smallest and lightest digital light meter in the Sekonic line-up. Designed to read ambient or flash exposures in either reflected or incident modes, the L-308S delivers accurate exposure readings in full, half, or third-stop increments to mirror the exposure displays of most popular cameras. When set to full-stop mode, exposures are displayed in tenth-stop increments with a repeat accuracy of +/- 0.1 EV.

Reflected readings capture at a light receiving angle of about 40-degrees, or slightly wider than the viewing field of a normal lens. For incident readings, a small, built-in Lumisphere slides over the silicon diode sensor. For flat-field incident readings, a Lumidisc (included) snaps over the sensor for metering flat artwork or measuring contrast and/or exposure ratios within a scene. Electronic flash exposures can be taken with or without a PC cord.

Exposure data is displayed on the LCD screen, which has been redesigned to emulate the look and feel of the LCD on the 'bigger-brother' Sekonic L-358 flash meter. Exposure data and related information is displayed using large type and easy-to-read icons. At ISO 100 ambient light can be read over an EV range of 0 to 19.9 in both incident and reflected mode. Flash exposures are displayed from f/1.4 to f/90.9 (or about f/124). ISO sensitivity is set from 3 to 8000 in third-stop increments. For cinema applications, the L-308S can be programmed to display exposure times from 8 to 128 frames-per-second.

The Sekonic L-308S FLASHMATE comes with a Lumidisc (with pouch), a soft case, strap, synchro terminal cap and a AA battery

Type	Digital exposure meter for ambient and flash light
Light receiving method	Incident light and reflected light
Incident light	Convertible to flat diffuser (Lumisphere in down position)
Light receptor element	Silicon photo diodes

Metering modes
Ambient light	Shutter priority metering EV metering
Flash	With synchro cord Without synchro cord

Display Range
Film speed	ISO 3 to 8000 (in 1/3 steps)
Shutter Speeds	Ambient light: 60 seconds to 1/8000 seconds (in 1, 1/2 or 1/3 stop) also 1/200, 1/400 Cine speeds: 8, 12, 16, 18, 24, 25, 30, 32, 64, 128 frames per second (at a 180 degree shutter angle) Flash: 1 to 1/500 second (in 1, 1/2 or 1/3 stop) also 1/75, 1/80, 1/90, 1/100
Flash	30 minutes to 1/1000 second (in 1, 1/2 or 1/3 stop) plus 1/75, 1/80, 1/90, 1/100, 1/200, 1/400
Aperture:	f/1.0 to f/90.9 (in 1, 1/2 or 1/3 stop)
Shutter speed	Ambient light: 60 seconds to 1/8000 seconds (in 1, 1/2 or 1/3 stop) also 1/200, 1/400 Cine speeds: 8, 12, 16, 18, 24, 25, 30, 32, 64, 128 frames per second (at a 180 degree shutter angle) Flash: 1 to 1/500 second (in 1, 1/2 or 1/3 stop) also 1/75, 1/80, 1/90, 1/100

Other features
Dimensions:	2.4 inch W x 6.1 inch H x 1.5 inch D (60mmW x 155mmH x 37mmD)
Weight:	5.4oz (153gm) with battery
Exposure Out of Range:	U (underexposure) or O (overexposure) indication
Battery Power Indicator display:	With 3 level status icon
Auto Power Off:	4 minutes after last use
Battery used:	One AA battery (1. 5V Alkaline or Manganese dry cell)
Operating temperature range:	32 deg to 104 deg F (0 deg to 40 deg C)
Storage temperature range:	-4 deg to 140 deg F (-20 deg to 60 deg C)